Dell PRECISION T1650 Owner'S Manual Download Page 3

Page: 3 / 61

Contents

Notes, Cautions, and Warnings...................................................................................................2

1 Working on Your Computer.......................................................................................................5

Before Working Inside Your Computer

.....................................................................................................................5

Turning Off Your Computer

.......................................................................................................................................6

After Working Inside Your Computer

........................................................................................................................6

2 Removing and Installing Components.....................................................................................7

Recommended Tools

................................................................................................................................................7

Removing the Cover

..................................................................................................................................................7

Installing the Cover

...................................................................................................................................................7

Removing the Intrusion Switch

.................................................................................................................................8

Installing the Intrusion Switch

..................................................................................................................................8

Removing the Front Panel

.........................................................................................................................................9

Installing the Front Panel

........................................................................................................................................10

Removing the Expansion Card

................................................................................................................................10

Installing the Expansion Card

.................................................................................................................................11

Removing the Memory Card Reader (Optional)

......................................................................................................11

Installing the Memory Card Reader (Optional)

.......................................................................................................12

Memory Module Guidelines

...................................................................................................................................12

Removing the Memory

............................................................................................................................................12

Installing the Memory

.............................................................................................................................................13

Removing the Coin-Cell Battery

..............................................................................................................................13

Installing the Coin-Cell Battery

...............................................................................................................................13

Removing the Hard Drive

........................................................................................................................................14

Installing the Hard Drive

.........................................................................................................................................15

Removing the Mini-Hard Drive (Optional)

...............................................................................................................15

Installing the Mini-Hard Drive (Optional)

................................................................................................................16

Removing the Optical Drive

....................................................................................................................................16

Installing the Optical Drive

.....................................................................................................................................17

Removing the Slim-Optical Drive (Optional)

...........................................................................................................18

Installing the Slim-Optical Drive (Optional)

............................................................................................................19

Removing the Speakers

..........................................................................................................................................19

Installing the Speakers

...........................................................................................................................................20

Removing the Power Supply

...................................................................................................................................20

Installing the Power Supply

....................................................................................................................................23

Removing the Heat Sink

..........................................................................................................................................23

Summary of Contents for PRECISION T1650






























































Search results

Summary of Contents for PRECISION T1650

Reviews:

Related manuals for PRECISION T1650

Brands by name

Popular brands

Dell PRECISION T1650, Owner'S Manual

Search results

Summary of Contents for PRECISION T1650

Reviews:

Related manuals for PRECISION T1650

Brands by name

Popular brands