Memory size in CMOS invalid
...................................................................................93
Memory tests terminated by keystroke
.................................................................... 93
No boot device available
.......................................................................................... 93
No boot sector on hard-disk drive
............................................................................93
No timer tick interrupt
..............................................................................................93
Non-system disk or disk error
...................................................................................93
Not a boot diskette
....................................................................................................93
Plug and play configuration error
.............................................................................94
Read fault
..................................................................................................................94
Requested sector not found
..................................................................................... 94
Reset failed
............................................................................................................... 94
Sector not found
...................................................................................................... 94
Seek error
................................................................................................................ 94
Shutdown failure
......................................................................................................94
Time-of-day clock stopped
...................................................................................... 95
Time-of-day not set-please run the System Setup program
................................... 95
Timer chip counter 2 failed
...................................................................................... 95
Unexpected interrupt in protected mode
................................................................. 95
WARNING: Dell's Disk Monitoring System has detected that drive [0/1] on the
[primary/secondary] EIDE controller is operating outside of normal
specifications. It is advisable to immediately back up your data and replace
your hard drive by calling your support desk or Dell.
...............................................95
Write fault
................................................................................................................. 95
Write fault on selected drive
.................................................................................... 96
X:\ is not accessible. The device is not ready
..........................................................96
26 Specifications......................................................................................... 97
Specifications
..................................................................................................................97
27 Contacting Dell..................................................................................... 104
Contacting Dell
..............................................................................................................104
