Installing the Wireless Local Area Network (WLAN) Card
1.
Insert the WLAN card in its slot in the computer.
2.
Press down the WLAN card and tighten the screw to secure the WLAN card to the computer.
3.
Route the antenna cables through the routing channel and connect them to the WLAN card.
4.
Install the:
a) base cover
b) battery
5.
Follow the procedures in
After Working Inside Your Computer.
Removing Wireless Wide Area Network (WWAN) Card (Optional)
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) battery
b) base cover
3.
Please perform the following steps to remove the WWAN card:
a) Disconnect and un-route and remove the antenna cables connected to the WWAN card.
b) Remove the screw that secures the WWAN card to the computer.
c) Remove the WWAN card from the computer.
NOTE: The location of the WWAN card may vary from what is displayed in the illustrations.
Installing the Wireless Wide Area Network (WWAN) Card
(Optional)
1.
Slide the WWAN card in the WWAN card slot.
2.
Press down the WWAN card and tighten the screw to secure the WWAN card to the computer.
3.
Route the antenna cables through the routing channels and connect them to the WWAN card.
4.
Install the:
a) base cover
b) battery
5.
Follow the procedures in
After Working Inside Your Computer.
Removing the Optical Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
17
Summary of Contents for Precision M6800
