Dell Precision M6800 Owner'S Manual Download Page 80

Page: 80 / 83

Feature

Specification

•

9-cell /9-cell LCL - 535 g (1.18 lb)

Voltage

11.10 V

Temperature range:

Operating

•

Charge : 0 °C to 50 °C (32 °F to 158 °F)

•

Discharge: 0 °C to 70 °C (32 °F to 122 °F)

Non-operating

-20 °C to 65 °C (4 °F to 149 °F)

Coin-cell battery

3 V CR2032 lithium ion cell

Table 30. AC Adapter

Feature

M4800

M6800

Input voltage

90 VAC to 264 VAC

Input current (maximum)

2.50 A

3.50 A

Input frequency

50 Hz to 60 Hz

Output power

180 W

240 W

Output current

9.23 A

12.30 A

Rated output voltage

19.50 VDC

Dimensions:

180 W

240 W

Height

30 mm (1.18 inches)

25.40 mm (1 inch)

Width

155 mm (6.10 inches)

200 mm (7.87 inches)

Depth

76 mm (2.99 inches)

100 mm (3.93 inches)

Temperature range:

Operating

0 °C to 40 °C (32 °F to 104 °F)

Non Operating

–40 °C to 65 °C (–40 °F to 149 °F)

Table 31. Contactless Smart Card

Feature

Specification

Supported Smart Cards and
Technologies

•

ISO14443A — 160 kbps, 212 kbps, 424 kbps, and 848 kbps

•

ISO14443B — 160 kbps, 212 kbps, 424 kbps, and 848 kbps

•

ISO15693

•

HID iClass

•

FIPS201

•

NXP Desfire

Summary of Contents for Precision M6800




















































































Search results

Summary of Contents for Precision M6800

Reviews:

Related manuals for Precision M6800

Brands by name

Popular brands

Dell Precision M6800, Owner'S Manual

Search results

Summary of Contents for Precision M6800

Reviews:

Related manuals for Precision M6800

Brands by name

Popular brands