To replace the computer cover, perform the following steps:
1.
Check all cable connections, especially those that might have come loose during your work. Fold cables out of the way so that they do not
catch on the computer cover. Make sure cables are not routed over the drive bracket
—
they will prevent the cover from closing properly.
2.
Check to see that no tools or extra parts (including screws) are left inside the computer's chassis.
3.
Facing the left side of the computer, hold the cover at a slight angle as shown in
Figure 2
.
4.
Fit the three cover hooks into the rectangular slots on the chassis. (It might be helpful to look down into the chassis to verify that the hooks are
in place.)
5.
Pivot the cover down toward the back and into position. Make sure that the two securing buttons click into place.
Interior Service Label
Figure 3 shows the location of the interior service label on the inside of the top cover. This label shows the location of components within the
chassis and locations of system board components and connectors. It also contains an important notice that provides instructions you need to
follow to help prevent damage to your system board while you troubleshoot and service the computer system.
Figure 3. Interior Service Label
Internal View
Figure 4 shows the chassis with the top cover removed.
Figure 4. Chassis Orientation View
1
Securing buttons (2)
