Dell Precision 1G155, Setup And Quick Reference Manual

Page: 34 / 206

34
S e t u p a n d Q u i c k Re f e r e n c e G u i d e
www
.dell.com | support.dell.com
• graphic card
• microprocessor
To access the
User’s Guide
from your hard drive:
1
Depending on your operating system, double-click the User’s Guides
icon or click Start button and select Help and Support .
NOTE:
You can also
access the User’s Guide
from the Dell Precision
ResourceCD or
support.dell.com
. See
"Finding Information and
Assistance" on page 5.
2
Click Removing and Installing Parts .
3
Select Print from the File menu to print the procedure before you
begin working.
To print the entire User’s Guide from Internet Explorer, select Print all
linked documents in the Print window.
Adding Devices and Software
Before you install any devices or software that did not ship with your
computer, read the documentation that came with the software or device or
contact the vendor to verify that the software or device is compatible with
your computer and operating system.
Problems With Additional Devices and Software
If you have installed additional software or devices and are experiencing
problems with your computer, use the following procedures to solve the
problem:
• Remove or uninstall the device or software.
See the documentation that came with the device or software for
information on removing and uninstalling.
• Set your computer to Last Known Good Configuration .
For Windows NT
®
, press the spacebar when the message
Press the
spacebar NOW to invoke Hardware Profile/Configuration
Recovery Menu
appears during system startup. In the Hardware
Profile/Configuration Recovery Menu , press <L> to switch to the
last known good setting, and then select your operating system.
For Windows 2000 and Windows XP, restart your computer and press
<F8> when the message
Please select the operating system
to start
appears. Highlight Last Known Good Setting, press