Dell PowerVault MD3260i Series Deployment Manual Download Page 9 | Manualshive

Page: 9 / 57

background image

2

Hardware Installation

Before using this guide, ensure that you review the instructions in the:

•

Getting Started Guide

—The

Getting Started Guide

that shipped with the storage array, provides information to

configure the initial setup of the system.

•

Dell PowerVault MD3260/3260i/3660i/3660f/3060e Storage Arrays Administrator's Guide

—The Administrator's

Guide provides information about important concepts you must know before setting up your storage solution.

See the Administrator's Guide at support.dell.com/manuals.

•

The Rack Installation instructions, that shipped with the storage array, provides information on how to rack your

system.

Planning The Storage Configuration

Consider the following before installing your storage array:

•

Evaluate data storage needs and administrative requirements.

•

Calculate availability requirements.

•

Decide the frequency and level of backups, such as weekly full backups with daily partial backups.

•

Consider storage array options, such as password protection and e-mail alert notifications for error conditions.

•

Design the configuration of virtual disks and disk groups according to a data organization plan. For example, use

one virtual disk for inventory, a second for financial and tax information, and a third for customer information.

•

Decide whether to allow space for hot spares, which automatically replace failed physical disks.

Connecting The Storage Array

The storage array is connected to a host using two hot-swappable RAID controller modules. The RAID controller
modules are identified as RAID controller module 0 and RAID controller module 1.
Each RAID controller module has four iSCSI IN port connectors that provide Ethernet connections to the host or node.
Each RAID controller module also contains an Ethernet management port and a SAS OUT port connector. The Ethernet
management port allows you to install a dedicated management station (server or stand-alone system). The SAS OUT
port allows you to connect the storage array to optional expansion enclosures for additional storage capacity.
Each PowerVault MD3260i Series storage array can be expanded to a maximum of 120 (or 180, if enabled using Premium
Feature activation) physical disks through a maximum of seven PowerVault MD3060e Series expansion enclosures.

Cabling The Storage Array

The iSCSI interface enables different host-to-controller configurations. The figures in this chapter are grouped
according to the following categories:

•

Direct-attached configurations (no Ethernet switches are used)

•

Network-attached (SAN) configurations (Ethernet switches are used)

9

«
...
7
8
9
10
11
...
»

Summary of Contents for PowerVault MD3260i Series


























































Reviews:

No comments

Related manuals for PowerVault MD3260i Series

Brand: BAC Pages: 24

Brand: Daikin Pages: 20

Brand: SeaLevel Pages: 40

EES-5718 Series

Brand: Evalue Technology Pages: 16

Brand: PROAIM Pages: 3

Brand: Worx Professional Pages: 106

Afolux LX Series

Brand: IEI Technology Pages: 131

ACO-3000-4L-5350U

Brand: C&T Solution Pages: 97

Brand: Hatteland Pages: 52

Brand: Fellowes Pages: 21

Brand: Cybernet Pages: 69

iOne-H19 Series

Brand: Cybernet Pages: 33

Brand: Design SHIFT Pages: 16

Brand: Global American Pages: 53

PAX Tower 5535212

Brand: zarges Pages: 28

Brand: Faytech Pages: 2

Brand: IBM Pages: 214

RS/6000 Enterprise Server M80

Brand: IBM Pages: 212

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands