manualshive.com logo in svg

Dell PowerVault MD3260i Series, Deployment Manual

The Dell PowerVault MD3260i Series Troubleshooting Manual is a comprehensive guide designed to assist users in resolving any issues they may encounter with their MD3260i storage system. This essential manual is available for free download from our website, ensuring easy access for users seeking assistance with their Dell PowerVault MD3260i Series.

Share
Download
background image

Task

Purpose

degrades or fails, or an adverse environmental condition 
occurs.

Configure a storage array

To create virtual disks and map them to hosts.

Step 2: Configure The iSCSI Ports On The Storage Array

By default, the iSCSI ports on the storage array are set to the following IPv4 settings:

Controller 0, Port 0: IP: 192.168.130.101 Subnet Mask: 255.255.255.0 Port: 3260

Controller 0, Port 1: IP: 192.168.131.101 Subnet Mask: 255.255.255.0 Port: 3260

Controller 0, Port 2: IP: 192.168.132.101 Subnet Mask: 255.255.255.0 Port: 3260

Controller 0, Port 3: IP: 192.168.133.101 Subnet Mask: 255.255.255.0 Port: 3260

Controller 1, Port 0: IP: 192.168.130.102 Subnet Mask: 255.255.255.0 Port: 3260

Controller 1, Port 1: IP: 192.168.131.102 Subnet Mask: 255.255.255.0 Port: 3260

Controller 1, Port 2: IP: 192.168.132.102 Subnet Mask: 255.255.255.0 Port: 3260

Controller 1, Port 3: IP: 192.168.133.102 Subnet Mask: 255.255.255.0 Port: 3260

NOTE: No default gateway is set.

To configure the iSCSI ports on the storage array:

1.

From MD Storage Manager navigate to the Setup tab on the AMW. Click configure Ethernet management ports and 

then select Configure iSCSI Host Ports.

2.

Configure the iSCSI ports on the storage array.

NOTE: Using static IPv4 addressing is recommended, although DHCP is supported.

The following settings are available (depending on your specific configuration) by clicking the Advanced button:

– Virtual LAN (VLAN) support — A VLAN is a network of different systems that behave as if they are 

connected to the same segments of a local area network (LAN) and are supported by the same switches 

and routers. When configured as a VLAN, a device can be moved to another location without being 

reconfigured. To use VLAN on your storage array, obtain the VLAN ID from your network administrator and 

enter it here.

– Ethernet priority — This parameter is set to determine a network access priority.
– TCP listening port — The port number on the storage array listens for iSCSI logins from host server iSCSI 

initiators.

NOTE: The TCP listening port for the iSNS server is the port number the storage array controller uses 

to connect to an iSNS server. This allows the iSNS server to register the iSCSI target and portals of 

the storage array so that the host server initiators can identify them.

– Jumbo frames — Jumbo Ethernet frames are created when the maximum transmission units (MTUs) are 

larger than 1500 Bytes per frame. This setting is adjustable port-by-port.

3.

To enable ICMP PING responses for all ports, select Enable ICMP PING responses.

4.

Click OK when all iSCSI storage array port configurations are complete.

5.

Test the connection for each iSCSI storage array port.

Step 3: Perform Target Discovery From The iSCSI Initiator

This step identifies the iSCSI ports on the storage array to the host server. Select the set of steps in one of the following 
sections (Microsoft Windows or Linux) that corresponds to your operating system.

35

Summary of Contents for PowerVault MD3260i Series


























































Reviews:

No comments

Related manuals for PowerVault MD3260i Series

Barco PWS-101 Specifications preview
PWS-101
Brand: Barco Pages: 2
Quanmax QDSP-0200 Series User Manual preview
QDSP-0200 Series
Brand: Quanmax Pages: 39
VISIONARY DESIGNS MOD-1182 Setup Instructions preview
MOD-1182
Brand: VISIONARY DESIGNS Pages: 2
Walfront JDSW43R Installation Manual preview
JDSW43R
Brand: Walfront Pages: 39
Advantech UNO-2174A User Manual preview
UNO-2174A
Brand: Advantech Pages: 44
IBASE Technology CSB200-898 User Manual preview
CSB200-898
Brand: IBASE Technology Pages: 87
Prentke Romich Company Accent 700 Hardware Manual preview
Accent 700
Brand: Prentke Romich Company Pages: 36
Oracle MICROS Compact Workstation 310 Quick Assembly Manual preview
MICROS Compact Workstation 310
Brand: Oracle Pages: 2
Uplift Desk 3-Leg Desk Assembly Instructions Manual preview
3-Leg Desk
Brand: Uplift Desk Pages: 12
Partners PC Setup Manual preview
PC
Brand: Partners Pages: 3
Silicon Graphics IRIS Indigo Owner'S Manual preview
IRIS Indigo
Brand: Silicon Graphics Pages: 228
EVOC EIC--2201 Series User Manual preview
EIC--2201 Series
Brand: EVOC Pages: 22
Digital Equipment VT18X Upgrade And System Test Manual preview
VT18X
Brand: Digital Equipment Pages: 61
Digital Equipment Adaptec AHA-1742A User Information preview
Adaptec AHA-1742A
Brand: Digital Equipment Pages: 28
HELLER HHDF30S Instruction Manual preview
HHDF30S
Brand: HELLER Pages: 6
Gigabyte ST series Quick Start Manual preview
ST series
Brand: Gigabyte Pages: 12
ClearCube M1032W User Manual preview
M1032W
Brand: ClearCube Pages: 15
POLAK ERGO 400 Operating Instructions preview
ERGO 400
Brand: POLAK Pages: 4

Brands by name

Popular brands

Load more brands