manualshive.com logo in svg

Dell PowerVault MD3260i Series, Deployment Manual

The Dell PowerVault MD3260i Series Troubleshooting Manual is a comprehensive guide designed to assist users in resolving any issues they may encounter with their MD3260i storage system. This essential manual is available for free download from our website, ensuring easy access for users seeking assistance with their Dell PowerVault MD3260i Series.

Share
Download
background image

7

Appendix — Manual Configuration Of iSCSI

The following sections contain step-by-step instructions for configuring iSCSI on your storage array. However, before 
beginning, it is important to understand where each of these steps occur in relation to your host server or storage array 
environment.
The table below shows each iSCSI configuration step and where it occurs.

This Step is Performed on the Host Server Using the 

Microsoft or Linux iSCSI Initiator

This Step is Performed on the Storage Array Using 

PowerVault MD Storage Manager

1. Discover the storage array

2. Configure the iSCSI ports on the storage array

3. Perform target discovery from the iSCSI initiator

4. Configure host access

5. (Optional) Configure CHAP authentication on the 

storage array

6. (Optional) Configure CHAP authentication on the host 

server

7. Connect to the storage array from the host server

8. (Optional) Set up in-band management

Step 1: Discover The Storage Array (Out-of-band Management 

Only)

Default Management Port Settings

By default, the storage array management ports are set to Dynamic Host Configuration Protocol (DHCP). If the 
controllers on your storage array are unable to get IP configuration from a DHCP server, it times out after 10 seconds 
and falls back to a default static IP address. The default IP configuration is:

Controller  0:  IP:  192.168.128.101  Subnet  Mask: 255.255.255.0

Controller  1:  IP:  192.168.128.102  Subnet  Mask: 255.255.255.0

NOTE: No default gateway is set.

NOTE: If DHCP is not used, initial configuration using the management station must be performed on the same 
physical subnet as the storage array. Additionally, during initial configuration, at least one network adapter must 
be configured on the same IP subnet as the storage array’s default management port (192.168.128.101 or 
192.168.128.102). After initial configuration (management ports are configured using PowerVault MD Storage 
Manager), the management station’s IP address can be changed back to its previous settings.

NOTE: This procedure applies to out-of-band management only. If you choose to set up in-band management, you 
must complete this step and then see 

Step 8: (Optional) Set Up In-Band Management

.

33

Summary of Contents for PowerVault MD3260i Series


























































Reviews:

No comments

Related manuals for PowerVault MD3260i Series

ASROCK DESKMINI SERIES User Manual preview
DESKMINI SERIES
Brand: ASROCK Pages: 70
Compaq Presario 7360 Maintenance And Service Manual preview
Presario 7360
Brand: Compaq Pages: 69
NEC PC-8201A User Manual preview
PC-8201A
Brand: NEC Pages: 219
IBM NetVista A30 (Polish) Quick Reference preview
NetVista A30
Brand: IBM Pages: 72
Shuttle XH410G Quick Manual preview
XH410G
Brand: Shuttle Pages: 3
Shuttle P22U User Manual preview
P22U
Brand: Shuttle Pages: 25
Cincoze GM-1000 Series User Manual preview
GM-1000 Series
Brand: Cincoze Pages: 107
Ciara Horizon D10500 User Manual preview
Horizon D10500
Brand: Ciara Pages: 71
VersaLogic Blackbird VL-EPU4462 Hardware Reference Manual preview
Blackbird VL-EPU4462
Brand: VersaLogic Pages: 74
Advantech ARK-1250L User Manual preview
ARK-1250L
Brand: Advantech Pages: 82
MuxLab 500823 Operation Manual preview
500823
Brand: MuxLab Pages: 11
RadiSys EPC-2 Hardware Reference Manual preview
EPC-2
Brand: RadiSys Pages: 69
MSI MAG Codex Series User Manual preview
MAG Codex Series
Brand: MSI Pages: 36
Aaeon BOXER-6638U User Manual preview
BOXER-6638U
Brand: Aaeon Pages: 95
Balt 89853 Assembly Instructions Manual preview
89853
Brand: Balt Pages: 15
IBM RT PC Manual To Operations preview
RT PC
Brand: IBM Pages: 143
Acer Add-In-One Series User Manual preview
Add-In-One Series
Brand: Acer Pages: 12
Lenovo 10M7 User Manual And Hardware Maintenance Manual preview
10M7
Brand: Lenovo Pages: 72

Brands by name

Popular brands

Load more brands