Dell PowerVault MD3000 Hardware Owner'S Manual Download

Page: 64 / 102

Troubleshooting Your Enclosure

Troubleshooting Enclosure Cooling Problems

Problem

•

Systems management software issues a fan-related error message.

Action

Ensure that none of the following conditions exist:

•

Ambient temperature is too high.

•

External airflow is obstructed.

•

A power supply/cooling fan module has failed. See "Troubleshooting a Fan" on page 64.

Troubleshooting a Fan

Problem

•

Enclosure-status indicator is amber.

•

Systems management software issues a fan-related error message.

•

Fan status indicator indicates a problem with the fan.

Action

Locate the malfunctioning fan.

Ensure that the faulty power supply/cooling fan module is properly connected to the

enclosure

midplane.

If the problem is not resolved, install a new power supply/cooling fan module. See
"Removing and Installing the Power Supply/Cooling Fan Module" on page 54.

If the replacement fan does not operate, see "Getting Help" on page 69.

Troubleshooting SAS Physical Disks

NOTICE:

This procedure can destroy data stored on the physical disks. Before you continue, back up all files on

the disk.

Problem

•

A single

physical disk

is not seen in MD Storage Manager.

Action

Remove the

physical disk

from the enclosure. See "Removing and Installing Physical Disks" on

page 48.

Inspect the

physical disk

and midplane connectors for obvious damage.

Summary of Contents for PowerVault MD3000







































































































Search results

Summary of Contents for PowerVault MD3000

Reviews:

Related manuals for PowerVault MD3000

Brands by name

Popular brands

Dell PowerVault MD3000, Hardware Owner'S Manual

Search results

Summary of Contents for PowerVault MD3000

Reviews:

Related manuals for PowerVault MD3000

Brands by name

Popular brands