Dell PowerVault DL2300 Owner'S Manual Download Page 14

Page: 14 / 121

Item

Indicator, Button, or

Connector

Icon

Description

PCIe expansion card slots
full height (3)

Allows you to connect up to three full-height PCI Express
expansion cards.

Power supply (PSU1)

750 W AC

Power supply (PSU2)

750 W AC

Hard drives (2) (back)

Hot-swappable 2.5 inch hard drives.

vFlash media card slot

Allows you to insert a vFlash media card.

NIC Indicator Codes

Figure 4. NIC Indicator

1. link indicator
2. activity indicator

Indicator

Indicator Code

Link and activity
indicators are off

The NIC is not connected to the network.

Link indicator is
green

The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10 Gbps).

Link indicator is
amber

The NIC is connected to a valid network at less than its maximum port speed.

Activity indicator is
blinking green

Network data is being sent or received.

Power Indicator Codes

Each AC power supply has an illuminated translucent handle and each DC power supply (when available) has an LED
that serves as an indicator to show whether power is present or whether a power fault has occurred.

Summary of Contents for PowerVault DL2300


























































































































Search results

Summary of Contents for PowerVault DL2300

Reviews:

Related manuals for PowerVault DL2300

Brands by name

Popular brands

Dell PowerVault DL2300, Owner'S Manual

Search results

Summary of Contents for PowerVault DL2300

Reviews:

Related manuals for PowerVault DL2300

Brands by name

Popular brands