Dell PowerVault 630F, Installation Manual

Page: 36 / 52

1-18 Dell PowerVault Storage Systems — Rack Installation Guide
Installing Two 800-W SPS Units in the 800-W SPS Tray
1. Insert the two 800-W SPS units in the 800-W SPS tray.
2. Fasten the three mounting brackets to the SPS units and to the tray as shown in
Figure 1-15. Tighten all screws securely.
Figure 1-15. Installing Two 800-W SPS Units in the Tray
3. Attach a mounting bracket to the left corner of the left-hand SPS unit using two
captive Phillips-head screws on the right side of the mounting bracket.
4. Secure the two remaining Phillips-head screws on this mounting bracket to the
left side tray mounting flange (as viewed from the back).
5. Attach a mounting bracket to the right corner of the right-hand SPS unit using two
captive Phillips-head screws on the left side of the mounting bracket.
6. Secure the two remaining screws on this mounting bracket to the right-hand side
tray mounting flange.
7. Connect the two SPS units in the center using a mounting bracket and four cap-
tive Phillips-head screws.
8. Fasten the SPS units to the front of the 800-W tray by inserting a Phillips screw-
driver through the holes in the front of the tray and securing the captive screws
into each SPS unit.
SPS unit (2)
captive screws (4)
mounting brackets (3)
with captive Phillips-
head screws