Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]
using the Autobaud feature, it will not be necessary to set a baud rate. See
Installing the PowerVault 35F
for more
information on using the autobaud feature.
Fibre Channel Configuration
This option allows for setting the Fibre Channel Address method, hard address value, and WWN overrides.
When configuring the Fibre Channel AL_PA, the PowerVault 35F will present a list of loop addresses along with the
corresponding AL_PA. The user selects the loop address desired.
SCSI Configuration
This option allows for setting the SCSI Initiator ID, enabling SCSI target IDs, and setting the SCSI bus reset behavior.
