Dell PowerEdge T620 Owner'S Manual Download Page 12

Page: 12 / 149

Item

Indicator, Button, or

Connector

Icon

Description

NOTE: In systems supporting S110
Software RAID configuration, hard-
drive slots 4 through 7 do not support
any hard drives and are installed with
hard-drive blanks.

Front-Panel Features And Indicators—Rack Mode

Figure 3. Front-Panel Features and Indicators—2.5 Inch Hard-Drive Chassis

NOTE: If your system is a rack, it comes preconfigured with the rack ears and does not have the stabilizer feet.

Item

Indicator, Button, or

Connector

Icon

Description

1, 11

USB connectors (2)

Allows you to connect USB devices to the system. The
ports are USB 2.0-compliant.

Optical drive (optional)

One optional SATA DVD-ROM drive or DVD+/-RW drive.

Hard-drive bay

3.5 inch
hard-drive
systems

Up to twelve 3.5 inch hot-swappable
hard drives.
Up to four Dell PowerEdge Express Flash
devices (PCIe SSDs).

2.5 inch
hard- drive
systems

Up to thirty two 2.5 inch hot-swappable
hard drives.
Up to four PCIe SSDs.

Summary of Contents for PowerEdge T620






















































































































































Search results

Summary of Contents for PowerEdge T620

Reviews:

Related manuals for PowerEdge T620

Brands by name

Popular brands

Dell PowerEdge T620, Owner'S Manual

Search results

Summary of Contents for PowerEdge T620

Reviews:

Related manuals for PowerEdge T620

Brands by name

Popular brands