2.
Keep the Phillips #2 screwdriver ready.
3.
Place the system on a flat and stable surface with the wheels extending beyond the edge of the
surface.
Steps
1.
Remove the screw that secures the front wheel unit to the base of the chassis.
2.
Slide the front wheel unit slightly to the back of the system to release the retention hooks, and pull
the front wheel unit.
3.
Remove the screw securing the back wheel unit to the base of the chassis.
4.
Slide the back wheel unit slightly to the front of the system to release the retention hooks, and pull
the back wheel unit.
Figure 19. Removing caster wheels
1.
slot on base of the tower (4)
2. wheel assembly unit (2)
3. screw for wheel assembly (2)
4. screw for support unit (2)
5. support unit
86
