CAUTION: To prevent damage to the memory module or the memory module socket during
installation, do not bend or flex the memory module; insert both ends of the memory module
simultaneously.
2.
Align the edge connector of the memory module with the alignment key of the memory module
socket, and insert the memory module in the socket.
NOTE: The alignment key allows you to install the memory module in the socket in only one
orientation.
CAUTION: Do not apply pressure at the center of the memory module; apply pressure at both
ends of the memory module evenly.
3.
Press the memory module with your thumbs until the socket levers firmly click into place.
Figure 21. Installing the memory module
1.
memory module
2. alignment key
3. memory module socket ejector (2)
Next steps
1.
Follow the procedure listed in
After working inside your system
.
2.
Press F2 to enter System Setup, and check the
System Memory
setting.
The
System Memory Size
should reflect the installed memory.
3.
If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure
that the memory modules are firmly seated in the sockets.
4.
Run the system memory test in system diagnostics. See
Dell Embedded System Diagnostics
.
Cooling fan
Your system supports only one cooling fan.
67
