Dell PowerEdge M IO Aggregator Page 140 Reference Manual Download

Page: 140 / 264

138

Interfaces

www.dell.com | support.dell.com

name

Assign a name to the Default VLAN.

Syntax

name

vlan-name

To remove the name from the VLAN, use the

no name

command.

Parameters

Defaults

Not configured.

Command Modes

INTERFACE VLAN

Command

History

Usage

Information

This CLI applies only to the Default VLAN.

To display information about a named VLAN, enter the

show vlan

command with the name parameter

or the

show interfaces description

command.

Related

Commands

Change the view from a single interface to all interfaces on the stack unit or visa-versa.

Refresh the view.

Change the counters displayed from Packets on the interface to Bytes.

Change the [delta] column from change in the number of packets/bytes in the last interval to
rate per second.

Change the view to next interface on the stack unit, or if in the stack unit mode, the next
stack unit in the chassis.

Change the view to the previous interface on the stack unit, or if the stack unit mode, the
previous stack unit in the chassis.

Increase the screen refresh rate.

Decrease the screen refresh rate.

Return to the CLI prompt.

Table 11-2. monitor Command Menu Options

Key Description

vlan-name

Enter up to 32 characters as the name of the VLAN.

Version 8.3.17.0

Supported on M I/O Aggregator

default vlan-id

Assigns a descriptive text string to the interface.

interface vlan

Configures a VLAN.

show vlan

Displays the current VLAN configurations on the switch.

Summary of Contents for PowerEdge M IO Aggregator









































































































































































































































































Search results

Summary of Contents for PowerEdge M IO Aggregator

Reviews:

Related manuals for PowerEdge M IO Aggregator

Brands by name

Popular brands

Dell PowerEdge M IO Aggregator, Reference Manual

Search results

Summary of Contents for PowerEdge M IO Aggregator

Reviews:

Related manuals for PowerEdge M IO Aggregator

Brands by name

Popular brands