Dell PowerEdge M IO Aggregator Page 113 Reference Manual Download

Page: 113 / 264

Dynamic Host Configuration Protocol (DHCP) |

111

Command

History

show ip dhcp lease

Displays lease information about the dynamic IP address currently assigned to a DHCP client-enabled
interface.

Syntax

show ip dhcp lease [interface

type

slot

port

]

Parameters

Command Mode

EXEC Privilege

Default

Display DHCP lease information on all DHCP client-enabled interfaces on the switch.

Command

History

Version 8.3.17.0

Supported on M I/O Aggregator

interface

type slot/

port

Display DHCP lease information on the specified interface.

•

For the management interface on the stack-unit, enter the keyword

managementethernet

followed by slot/port information. The slot and port

range is 0.

•

For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.

Version 8.3.17.0

Supported on M I/O Aggregator

Summary of Contents for PowerEdge M IO Aggregator









































































































































































































































































Search results

Summary of Contents for PowerEdge M IO Aggregator

Reviews:

Related manuals for PowerEdge M IO Aggregator

Brands by name

Popular brands

Dell PowerEdge M IO Aggregator, Reference Manual

Search results

Summary of Contents for PowerEdge M IO Aggregator

Reviews:

Related manuals for PowerEdge M IO Aggregator

Brands by name

Popular brands