manualshive.com logo in svg

Dell PowerEdge FC830, Owner'S Manual, Page: 5 / 169

Share
Download
Dell PowerEdge FC830 Owner'S Manual Download Page 5

Installing a mezzanine card

.......................................................................................................... 78

Mezzanine card support bracket

........................................................................................................ 79

Removing the mezzanine card support bracket

..........................................................................79

Installing the mezzanine card support bracket

............................................................................81

Internal dual SD module (optional)

.................................................................................................... 82

Replacing an SD card

.................................................................................................................... 82

Internal USB key

............................................................................................................................ 83

Removing the IDSDM card

........................................................................................................... 85

Installing the IDSDM card

............................................................................................................. 86

rSPI card (optional)

..............................................................................................................................88

Removing the optional rSPI card

..................................................................................................88

Installing the optional rSPI card

....................................................................................................89

SD vFlash card

.....................................................................................................................................90

Replacing the SD vFlash card

........................................................................................................91

Network daughter card

.......................................................................................................................92

Removing the NDC

....................................................................................................................... 92

Installing the NDC

......................................................................................................................... 94

Processor blank and DIMM blank

.......................................................................................................95

Removing a processor blank and DIMM blank

............................................................................ 96

Installing a processor blank and DIMM blank

...............................................................................97

Processors

........................................................................................................................................... 97

Removing a heat sink

....................................................................................................................98

Removing a processor

.................................................................................................................. 99

Installing a processor

.................................................................................................................. 103

Installing a heat sink

....................................................................................................................104

Hard drives or SSDs

...........................................................................................................................106

Hard drive or SSD bay numbering

.............................................................................................. 107

Hard drive or SSD installation guidelines

....................................................................................107

Removing a hard drive or SSD

....................................................................................................108

Installing a hard drive or SSD

......................................................................................................109

Removing a hard drive or SSD blank

........................................................................................... 111

Installing a hard drive or SSD blank

.............................................................................................112

Shutdown procedure for servicing a hard drive or SSD

.............................................................114

Configuring the boot drive

..........................................................................................................114

Removing a 2.5-inch hard drive or SSD from a 2.5-inch hard drive or SSD carrier

..................114

Installing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier

........................115

Removing a 1.8-inch SSD from a 1.8-inch SSD carrier 

............................................................. 116

Installing a 1.8-inch SSD in a 1.8-inch SSD carrier

..................................................................... 117

Hard-drive or SSD cage

.....................................................................................................................118

Removing a hard-drive or SSD cage

...........................................................................................118

Installing a hard-drive or SSD cage

.............................................................................................119

Hard-drive or SSD backplane

............................................................................................................121

5

Summary of Contents for PowerEdge FC830










































































































































































Reviews:

No comments