support.dell.com
Rack Installation Guide
1-13
3.
Tilt the front of the computer upwards while aligning the back shoulder screws
on the sides of the computer with the back slots on the slide assemblies (see
Figure 1-10).
Figure 1-10. Installing the Computer in the Rack
4.
Engage the back shoulder screws in the slot just behind the back (green) latch
first, followed by the middle shoulder screw in the slot near the middle (yellow)
latch. Finally, engage the front shoulder screw in the front slot.
5.
Push the computer inward on the slide assemblies until the middle (yellow) latch
clicks into place, locking the slide to the middle shoulder screw (see Figure 1-10).
6.
Press up on the green latches and push the chassis into the rack.
7.
Tighten the thumbscrews on each rack adapter bracket.
back latch
(green)
middle latch (yellow)
05KCEeb1.fm Page 13 Thursday, September 14, 2000 1:37 PM
Summary of Contents for PowerEdge 4x00 Series
Page 2: ...05KCEfc1 fm Page 2 Thursday May 3 2001 10 04 AM ...
Page 3: ... www dell com support dell com RACK INSTALLATION GUIDE ...
Page 14: ...xii 05KCEes1 fm Page xii Thursday September 14 2000 1 36 PM ...
Page 37: ... www dell com support dell com 05KCEam1 fm Page 32 Thursday September 14 2000 1 32 PM ...