Dell PowerConnect M6348, Getting Started Manual

Page: 53 / 208

入門指南
51
交換機完成 POST 並啟動後，將顯示以下對話資訊：
Unit 1 - Waiting to select management unit (
單元
1
– 正在等待選擇管
理單元
)>
Applying configuration, please wait ...(
正在套用組態，請稍候
...)
Welcome to Dell Easy Setup Wizard (
歡迎使用
Dell
簡易安裝精靈
)
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly as possible.
You can skip the setup wizard, and enter CLI mode to manually
configure the switch. You must respond to the next question to run
the setup wizard within 60 seconds, otherwise the system will
continue with normal operation using the default system
configuration.Note: You can exit the setup wizard at any point by
entering [ctrl+z]. (
設定精靈指導您完成初始的交換機組態，讓您盡快使用交
換機。您可以跳過設定精靈，進入
CLI
模式以手動方式設定交換機。必須回答下一個
問題，在
60
秒內執行設定精靈，否則系統將繼續使用預設的系統組態正常作業。
註：可以隨時透過輸入
[ctrl+z]
鍵結束設定精靈。
)
Would you like to run the setup wizard (you must answer this
question within 60 seconds)? [Y/N] y (
要執行安裝精靈
[
必須在
60
秒內回
答該問題
]
嗎？
[Y/N]) y
步驟 1 ：
The system is not setup for SNMP management by default. To manage
the switch using SNMP (required for Dell Network Manager) you can (
系統預設並未設定用於
SNMP
管理。若要使用
SNMP
管理交換機
(Dell Network
Manager
所必需
)
，您可以
)
. Set up the initial SNMP version 2 account now. (
立即設定初始的
SNMP
版本
2)
。
. Return later and setup other SNMP accounts. (For more
information on setting up an SNMP version 1 or 3 account,
see the user documentation). (
稍後返回並設定其他
SNMP
帳戶。
(
如需
設定
SNMP
版本
1
或
3
帳戶的詳細資訊，請參閱使用者文件
))
。
Would you like to setup the SNMP management interface now? [Y/N] n
(
立即設定
SNMP
管理介面嗎？
[Y/N]) n