Dell PowerConnect M6348, Getting Started Manual

Page: 197 / 208

198 | הדובע תליחת ךירדמ
בלש
:2
Now we need to setup your initial privilege (Level 15) user account.
This account is used to login to the CLI and Web interface. You may
setup other accounts and change privilege levels later. For more
information on setting up user accounts and changing privilege
levels, see the user documentation.
To setup a user account:
Please enter the user name. [root]:root
Please enter the user password: ********
Please reenter the user password: ********
בלש
:3
Next, an IP address is setup. The IP address is defined on the default
VLAN (VLAN #1), of which all ports are members. This is the IP address
you use to access the CLI, Web interface, or SNMP interface for the
switch. Optionally you may request that the system automatically
retrieve an IP address from the network via DHCP (this requires that
you have a DHCP server running on the network).
To setup an IP address:
Please enter the IP address of the device (A.B.C.D) or enter "DHCP"
(without the quotes) to automatically request an IP address from
the network DHCP server. [192.168.2.1]: 192.168.2.1
Please enter the IP subnet mask (A.B.C.D or /nn).
[255.255.255.0]: 255.255.255.0
בלש
:4
Finally, setup the default gateway. Please enter the IP address
of the gateway from which this network is reachable. [0.0.0.0]:
This is the configuration information that has been collected:
User Account setup = root
Password = ********
Management IP address = 192.168.2.1 255.255.255.0
Default Gateway = 0.0.0.0