PowerConnect B-Series FCX Web Management Interface User Guide
83
53-1002268-01
Configuring a TACACS/ server
4
FIGURE 64
Configuring a TACACS/ server
The TACACS display contains the following information.
Click Show to display the current TACACS/ server configuration, as shown in
Figure 65
.
Retransmit
This parameter specifies how many times the Dell device will resend an authentification
request when the TACACS/ server does not respond. The retransmit value can
from 1-5 times. The default is 3 times.
Timeout
This parameter specifies how many seconds the Dell device waits for a response from a
TACACS/ server before either retrying the authentication request, or determining
that the TACACS/ servers are unavailable and moving on to the next
authentication method in the authentication method list. The timeout can be from 1 – 15
seconds. The default is 3 seconds.
Dead Time
This parameter specifies how long the Dell device waits for the primary authentication
server to reply before deciding the server is dead and trying to authenticate using the next
server. The dead-time value can be from 1 – 5 seconds. The default is 3 seconds.
Key
This parameter in the tacacs-server command is used to encrypt packets before
they are sent over the network. The value for the key parameter on the Dell device should
match the one configured on the server. The key can be from 1 – 32 characters
in length and cannot include any space characters.
Tacacs Server
Displays the TACACS Server information.
Summary of Contents for PowerConnect B-FCX
Page 1: ...53 1002268 01 25 March 2011 PowerConnect B Series FCX Web Management Interface User Guide ...
Page 6: ...vi PowerConnect B Series FCX Web Management Interface User Guide 53 1002268 01 ...
Page 10: ...x PowerConnect B Series FCX Web Management Interface User Guide 53 1002268 01 ...
Page 152: ...142 PowerConnect B Series FCX Web Management Interface User Guide 53 1002268 01 Using TFTP 5 ...
