Dell PowerConnect B-FCX, User Manual

Page: 83 / 152

PowerConnect B-Series FCX Web Management Interface User Guide 73
53-1002268-01
Configuring the system MAC filter
4
Destination Address The destination identification number in the IP.
Destination Mask This is a network mask applied to the destination address. It is specified as a 32-bit IP
address in dotted decimal format. The destination-mask attribute apples to all
protocols.
Frame type The Frame type can be any one of the following:
•
none
•
ethernet
•
llc
•
snap
Operator The comparison operator for TCP or UDP port names or numbers.
NOTE: This field applies only if the IP protocol is TCP or UDP.
Protocol The IP protocol can be one of the following well-known names or any IP protocol number
from 0 – 255.
•
Internet Control Message Protocol (ICMP)
•
Internet Group Management Protocol (IGMP)
•
Internet Gateway Routing Protocol (IGRP)
•
Internet Protocol (IP)
•
Open Shortest Path First (OSPF)
•
Transmission Control Protocol (TCP)
•
User Datagram Protocol (UDP)
System Define Displays the system defined protocol.
Add Allows you to add the MAC Addresses.
Modify Allows you to modify the changes made.
Delete Allows you to delete the changes made.
Show Click Show to see the current MAC Filter configuration.
Filter Group Click Filter Group to see information about a specific MAC Filter group, as shown in
Figure 55 .