Dell PowerConnect B-FCX, Hardware Installation Manual

Page: 16 / 86

6 PowerConnect B-FCX Switch Hardware Installation Guide
53-1002267-01
Hardware features
1
SFP interfaces
Table 3 describes the network interfaces supported on PowerConnect B-FCX devices.
Optional two-port 10 Gbps XFP uplink module
The PowerConnect B-FCX624s and PowerConnect B-FCX648s devices include a slot on the front
panel for a two-port 10 Gbps XFP uplink module. This module operates at 10 Gbps full duplex
mode.
TABLE 3 SFP network interfaces
Interface Show Media Description Description
1000Base-BX-D M-GBXD 1000Base-BXD SFP optic
SMF, transmits at 1490nm
and receives at 1310nm,
LC connector, single strand
SMF fiber. This optic
should only be connected
to an E1MG-BXU at the far
end.
1000Base-BX-U M-GBXU 1000Base-BX-U SFP optic
SMF, transmits at 1310nm
and receives at 1490nm,
LC connector, single strand
SMF fiber. This optic
should only be connected
to an E1MG-BXD at the far
end.
1000Base-LHA M-LHA 1000Base-LHA SFP optic,
SMF, LC connector, Optical
Monitoring Capable
1000Base-LX M-LX 1000Base-LX SFP optic,
SMF, LC connector, Optical
Monitoring Capable
1000Base-SX M-SX 1000Base-SX SFP optic,
MMF, LC connector, Optical
Monitoring Capable
100Base-FX M-FX 100Base-FX SFP optic
MMF 8 Pack, LC connector,
Optical Monitoring Capable
100Base-FX-IR M-FX_IR 100Base-FX-IR SFP optic
for SMF with LC connector,
Optical Monitoring
Capable. For distances up
to 15Km.
100Base-FX-LR M-FX-LR 100Base-FX-LRSFP optic
for SMF with LC connector,
Optical Monitoring
Capable. For distances up
to 40Km.