Error Code Message Information
Action
Reinstall the SD module.
RFM2004
Message
Failure detected on Internal Dual SD Module <
name
>.
LCD Message
Internal Dual SD Module <
name
> failed. Check SD Card.
Details
The SD card module is installed but improperly configured or failed to initialize.
Action
Reinstall the SD module and remove and reinstall SD cards.
RFM2006
Message
Internal Dual SD Module <
name
> is write protected.
Details
The module is write-protected. Changes may not be written to the media.
Action
If unintended, remove the media and disable write protection.
SEC0031
Message
The chassis is open while the power is on.
LCD Message Intrusion detected. Check chassis cover.
Details
The chassis is open. System performance may be degraded, and security may be
compromised.
Action
Close the chassis. Check system logs.
SEC0033
Message
The chassis is open while the power is off.
LCD Message Intrusion detected. Check chassis cover.
Details
The chassis was opened while the power was off. System security may have been
compromised.
Action
Close the chassis and verify hardware inventory. Check system logs.
SEL0006
Message
All event logging is disabled.
Details
This message is displayed when all event logging has been disabled by the user.
Action
If unintended, re-enable logging.
SEL0008
Message Log is full.
Details
When the event log is full, additional events are not written to the log. Older events may be
overwritten and lost. This message may also appear if the user disabled event logging.
Action
Backup and clear log.
SEL0012
Message Could not create or initialize the system event log.
Details
If the system event log fails to initialize, platform status and failure events are not captured.
Some management software do not report platform exceptions.
Action
Reboot the management controller or iDRAC. Cycle system input power. If problem persists
call support.
153
