About this task
Steps
1. Place the solid-state drive into the thermal plate and install the single (M2x2) screw.
2. Slide and insert the tab of the solid-state drive into the solid-state drive slot.
3. Replace the single (M2x2.2) screw and tighten the single captive screw to secures the thermal plate to the palmrest.
Next steps
1. Connect the
.
2. Install the
.
3. Install the
.
after working inside your computer
.
Removing the M.2 2280 Solid-state drive
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Disconnect the
.
Disassembly and reassembly
33
Summary of Contents for P90F
