Installing the DC-in Adapter Port
Steps
1. Place the DC-in adapter port into the slot on the palm-rest assembly.
2. Route the power-adapter port cable through its routing guides on the palm-rest assembly.
3. Replace the M2x3 screw that secures the power-adapter port to the palm-rest assembly.
4. Connect the power-adapter port cable to the system board.
5. Install the:
a. battery
b. base cover
6. Follow the procedures in
After Working Inside Your Computer
.
Antenna cover
Removing the antenna cover
Steps
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a.
b.
c.
d.
3. Carefully turn the display hinges at an angle.
Disassembly and reassembly
27
