Installing the WLAN Card
Steps
1. Align the notch on the WLAN card with the tab on the WLAN-card connector on the system board.
2. Align the bracket which secures the WLAN card to the palmrest assembly.
3. Connect the antenna cables to the WLAN card.
CAUTION:
To avoid damage to the WLAN card, do not place any cables under it.
NOTE:
The color of the antenna cables is visible near the tip of the cables. The antenna-cable color scheme for the
WLAN card supported by your computer is as follows:
Table 2. Antenna-Cable Color Scheme for the WLAN Card
Connectors on the WLAN card
Antenna-cable color
Main (white triangle)
white
Auxiliary (black triangle)
black
Multiple input, multiple output (grey triangle)
Grey (optional)
4. Tighten the screw to secure the bracket and the WLAN card to the palmrest assembly.
5. Install the:
a. battery
b. base cover
6. Follow the procedures in
After Working Inside Your Computer.
22
Disassembly and reassembly
