2. Remove the middle cap from the computer.
Installing the middle cap
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the middle cap and provides a visual representation of the installation procedure.
Steps
1. Align and insert the middle cap onto the palmrest.
NOTE:
Ensure that the middle cap is secured in place by the two pegs on the palmrest.
2. Replace the four (M2x3) screws to secure the middle cap in place.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
5. Install the
6. Install the
.
7. Install the
.
8. Install the
.
9. Install the
.
10. Install the
.
11. Install the
.
12. Install the
13. Install the
14. Install the
.
Demonteren en hermonteren
73
Summary of Contents for P44E
