Dell P44E Page 44 Service Manual Download

Page: 44 / 103

4. Lift the heat-sink assembly to remove it from the computer.

Installing the heat sink assembly

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the keyboard and provides a visual representation of the installation procedure.

Steps

1. Align and insert the heat-sink assembly into its slot on the computer.
2. Tighten the eight captive screws to secure the heat-sink assembly to the system board.

NOTE:

Tighten the captive screws in the order stamped onto the heat sink next to the screws [1 > 2 > 3 > 4 > 5 > 6 >

7 > 8].

3. Connect the two fan cables to the connector on the system board.
4. Adhere the power-adapter cable on the heat-sink assembly.

Next steps

1. Install the

battery

2. Install the

base cover

3. Install the

SD card

4. Follow the procedure in

after working inside your computer

Demonteren en hermonteren

Summary of Contents for P44E








































































































Search results

Summary of Contents for P44E

Reviews:

Related manuals for P44E

Brands by name

Popular brands

Dell P44E, Service Manual

Search results

Summary of Contents for P44E

Reviews:

Related manuals for P44E

Brands by name

Popular brands