Dell P34E Service Manual Download Page 112

Page: 112 / 122

Table 13. Wireless (continued)

Option

Description

●

WWAN/GPS

●

WLAN

●

Bluetooth

All the options are enabled by default.

Maintenance

Table 14. Maintenance

Option

Description

Service Tag

Displays the service tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set.

This option is not set by default.

BIOS Downgrade

Allows you to flash previous revisions of the system firmware.

●

Allow BIOS Downgrade

This option is set by default.

Data Wipe

Allows you to securely erase data from all internal storage devices.

●

Wipe on Next Boot

This option is not set by default.

BIOS Recovery

BIOS Recovery from Hard Drive

—This option is set by default. Allows you to recover the

corrupted BIOS from a recovery file on the HDD or an external USB drive.

BIOS Auto-Recovery

— Allows you to recover the BIOS automatically.

NOTE:

BIOS Recovery from Hard Drive

field should be enabled.

Always Perform Integrity Check

—Performs integrity check on every boot.

System logs

Table 15. System Logs

Option

Description

BIOS events

Allows you to view and clear the System Setup (BIOS) POST events.

Thermal Events

Allows you to view and clear the System Setup (Thermal) events.

Power Events

Allows you to view and clear the System Setup (Power) events.

Updating the BIOS

Updating the BIOS in Windows

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the

112

BIOS setup

Summary of Contents for P34E



























































































































Search results

Summary of Contents for P34E

Reviews:

Related manuals for P34E

Brands by name

Popular brands

Dell P34E, Service Manual

Search results

Summary of Contents for P34E

Reviews:

Related manuals for P34E

Brands by name

Popular brands