Dell P3421W User Manual Download Page 38

Page: 38 / 75

│

Operating the monitor

Accessing the menu system

NOTE: After you change the settings, press the joystick to save the
changes before you proceed to another menu or exit the OSD menu.

Icon

Menu and

Submenus

Description

Brightness/

Contrast

Use this menu to activate

Brightness/Contrast

adjustment.

Brightness

adjusts the luminance of the backlight.

Move the joystick up to increase the brightness level
or move the joystick down to decrease the brightness
level (min. 0 / max. 100).

Contrast

Adjusts the

Brightness

first, and then adjust the

Contrast

only if further adjustment is necessary.

Move the joystick up to increase the contrast level or
move the joystick down to decrease the contrast
level (min. 0 / max. 100).

The

Contrast

function adjusts the degree of

difference between darkness and lightness on the
monitor screen.

Summary of Contents for P3421W












































































Search results

Summary of Contents for P3421W

Reviews:

Related manuals for P3421W

Brands by name

Popular brands

Dell P3421W, User Manual

Search results

Summary of Contents for P3421W

Reviews:

Related manuals for P3421W

Brands by name

Popular brands