Dell P3421W User Manual Download Page 30

Page: 30 / 75

│

Setting up the monitor

Connecting the HDMI cable

NOTE: The default out of factory setting is HDMI 2.0. If the monitor
fails to show any content after the HDMI cable is connected, follow the
procedures below to change the settings from HDMI 2.0 to HDMI 1.4:

• Press the joystick to launch the Menu Launcher.

• Move the joystick up to select

and activate the OSD main menu.

• Toggle the joystick to highlight

Input Source

, then press the joystick to enter

the submenu.

• Toggle the joystick to highlight

HDMI

• Press and hold the joystick for approximately 10 seconds, and the HDMI

configuration message appears.

• Toggle the joystick to select

Yes

and then press the joystick to save the

changes.

Repeat the above steps to change the HDMI format settings if necessary.

Summary of Contents for P3421W












































































Search results

Summary of Contents for P3421W

Reviews:

Related manuals for P3421W

Brands by name

Popular brands

Dell P3421W, User Manual

Search results

Summary of Contents for P3421W

Reviews:

Related manuals for P3421W

Brands by name

Popular brands