manualshive.com logo in svg

Dell P3223DE, User Manual, Page: 57 / 79

Share
Download
Dell P3223DE User Manual Download Page 57

 

Operating the Monitor

       |

    

57

Icon Menu and 

Submenus

Description

 

Menu

Select this option to adjust the settings of the OSD, such 
as the languages of the OSD, the amount of time the menu 
remains on screen, and so on.

Exit

32 Monitor

Display

Menu

Input Source

Color

Personalize

Others

Brightness/Contrast

Rotation

Transparency

Language

Timer

Lock

Reset Menu

20

20 s

Disable

English

Select

Language

Set the OSD display to one of eight languages.
(English, Spanish, French, German, Brazilian Portuguese, 
Russian, Simplified Chinese, or Japanese).

Rotation

Rotates the OSD by 0/90/270 degrees.
You can press the Joystick to rotate each time.

Transparency

Select this option to change the menu transparency by 
moving the Joystick up or down (Range: 0 - 100).

Timer

OSD Hold Time: 

Sets the length of time the OSD remains 

active after you press a button.
Move the joystick to adjust the slider in 1-second 
increments, from 5 to 60 seconds.

Summary of Contents for P3223DE
















































































Reviews:

No comments