Dell P3223DE User Manual Download Page 4

Page: 4 / 79

| Contents

Tilt, Swivel and Vertical Extension. . . . . . . . . . . . . . . . . . . . . .32

Rotating the Monitor  . . . . . . . . . . . . . . . . . . . . . . 32
Adjusting the Rotation Display Settings of Your System.   .   .   .   33
Organizing Your Cables  . . . . . . . . . . . . . . . . . . . . . 34
Connecting Your Monitor . . . . . . . . . . . . . . . . . . . . 35
Dell Power Button Sync (DPBS)  . . . . . . . . . . . . . . . . 38

Connecting the Monitor for DPBS for the First Time . . . . . . . . . . . . 41
Using DPBS Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Connecting the Monitor for USB-C . . . . . . . . . . . . . . . . . . . . .44

Removing the Monitor Stand . . . . . . . . . . . . . . . . . . 46
Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . 47

Operating the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Turning On the Monitor . . . . . . . . . . . . . . . . . . . . . 48
Using the Joystick Control . . . . . . . . . . . . . . . . . . . 48
Using the Menu Launcher . . . . . . . . . . . . . . . . . . . . 49

Front-Panel Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Using the Main Menu . . . . . . . . . . . . . . . . . . . . . . 52

Using the OSD Lock Function . . . . . . . . . . . . . . . . . . . . . . . .63
Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
OSD Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Setting the Maximum Resolution . . . . . . . . . . . . . . . . . . . . . .70

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . 72
Common Problems. . . . . . . . . . . . . . . . . . . . . . . . 73
Product Specific Problems . . . . . . . . . . . . . . . . . . . 75
Universal Serial Bus (USB) Specific Problems . . . . . . . . . 78

Summary of Contents for P3223DE
















































































Search results

Summary of Contents for P3223DE

Reviews:

Dell P3223DE, User Manual, Page: 4 / 79

Search results

Summary of Contents for P3223DE

Reviews: