5. Disassembly and Assembly Procedures
Take away the
.
middle bezel, and put it on a fixture,
then tear off the mylar tape for releasing the LED
board
S10
S8
S9
S11
S13
S12
Take away the bracket chassis module and then put
the bracket chassis module on a protective cushion.
Put the panel module on a protective cushion, then
push the earing-locks and disconnect the LVDS
cable from the connector of the panel module.
Use a
2pcs
screws for unlocking the bracket with panel module.
Philips-head screwdriver to remove
(No.1~2 screw size=M3x4, Torque=5
±0.5
kgfxcm)
1
2
Disconnect the LED cable from the connector of the
board, then tear off 3pcs aluminum foil.
Lift up the panel with the bracket for releasing the
front bezel away from the panel.
Use a Philips-head screwdriver to remove 15pcs
screws for unlocking the middle bezel.
(No.1~13 screw size=M3x4, Torque=5
±0.5
kgfxcm;
No.14~15 screw size=M1.6x1.7, Torque=1
±0.2
kgfxcm)
2
10
12
1
11
3
8
13
9
7
4
5
6
14
15
S14
