4. Disassembly and Assembly Procedures
S9
S11
S8
S10
S7
U
Philips-head screwdriver to remove
se a
two
screws for unlocking the AC-power outlet connector.
And Use a Hex-head screwdriver to remove two
screws for unlocking mechanisms of the VGA
connectors.
(No.1~2 screw size=M3x10, Torque=6
±0.5
kgfxcm)
(No.3~4 screw size=M3x8, Torque=6
±0.5
kgfxcm)
Tear off the adhesive tapes to release the function
key cable. Remove the middle bezel and front bezel
then put them on a protector.
Use a Philips-head screwdriver to remove nine
screws for unlocking the middle bezel with the
assembled unit. Use a Philips-head screwdriver to
remove two screws for unlocking the front bezel. Put
the bracket chassis module on the protector.
(No.1~9 screw size=M3x4, Torque=5
±0.5
kgfxcm)
(No.10~11 screw size=M1.6x3.1, Torque=0.7
±0.2
kgfxcm)
6
11
10
9
5
4
1
2
3
8
7
Remove the interface and power boards from the
disconnect all of the cables.
bracket chassis module carefully, and then
2
3
4
1
Turn over the bracket chassis module. Remove the
Mylar from the hooks of the bracket, and then use a
Philips-head screwdriver to remove
screws for
unlocking the interface board and power board.
six
(No.1 screw size=M4x8, Torque=6
±0.5
kgfxcm;
No.2~6 screw size=M3x7.5, Torque=6
±0.5
kgfxcm)
2
1
4
5
3
6