Option
Description
NOTE: This field is only relevant when the
Integrated
NIC
control in the
System Configuration
group is set to
Enabled with ImageServer
and when
Client DHCP
is set
to
Static IP
.
Client SubnetMask
Displays the subnet mask of the client. The default setting is
255.255.255.255
.
NOTE: This field is only relevant when the
Integrated
NIC
control in the
System Configuration
group is set to
Enabled with ImageServer
and when
Client DHCP
is set
to
Static IP
.
Client Gateway
Displays the gateway IP address for the client. The default
setting is
255.255.255.255
.
NOTE: This field is only relevant when the
Integrated
NIC
control in the
System Configuration
group is set to
Enabled with ImageServer
and when
Client DHCP
is set
to
Static IP
.
DNS IP Address
Displays the DNS IP address of the cleint. The default setting
is
255.255.255.255
.
Domain Name
Displays the Domain Name of the client.
Advanced
Specifies for Advanced debugging
•
Verbose Mode
(Disabled by default)
Table 13. System Logs
Option
Description
BIOS events
Displays the system event log and allows you to clear the
log.
• Clear Log
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet
1.
Re-start the computer.
2.
Go to
dell.com/support
.
3.
Enter the
Service Tag
or
Express Service Code
and click
Submit
.
NOTE: To locate the Service Tag, click
Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click
Detect My Product
. Proceed with the
instructions on screen.
4.
If you are unable to locate or find the Service Tag, click the Product Category of your computer.
5.
Choose the
Product Type
from the list.
42
