manualshive.com logo in svg

Dell OptiPlex 3030, Owner'S Manual

Share
Download
Dell OptiPlex 3030 Owner'S Manual Download Page 37

Option

Description

• Confirm the new password

Strong Password

Enable strong password

 - This option is disabled by default.

Password Configuration

This field controls the minimum and maximum number of 
characters allowed for the admin and system passwords.
• Admin Password Min
• Admin Password Max
• System Password Min
• System Password Max

By default the minimum characters are set to 4 and 

maximum to 32.

Password Bypass

Allows you to bypass the 

System Password

 and the internal 

HDD password prompts during a system restart.
• Disabled - This option is selected by default.
• Reboot Bypass

Password Change 

Allows you to determine whether changes to the system and 
hard disk passwords are permitted when an administrator 

password is set.
•

Allow Non-Admin Password Changes 

- This option is 

enabled by default.

TPM Security

Allows you to control whether the Trusted Platform Module 

(TPM) in the system is enabled and visible to the operating 
system.

TPM Security

 - This option is disabled by default.

Computrace

Allows you to activate, deactivate or disable the BIOS 

module interface of the optional 

Computrace Service

 from 

Absolute Software

.

•

Deactivate 

- This option is disabled by default.

• Disable
• Activate

CPU XD Support

Allows you to enable or disable the execute disable mode of 

the processor.
•

Enable CPU XD Support

 - This option is enabled by 

default.

Admin Setup Lockout

Allows you to enable or disable the option to enter setup 

when an admin password is set.
•

Enable Admin Setup Lockout

 - This option is disabled by 

default.

37

Summary of Contents for OptiPlex 3030



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands