3.
Perform the following steps as shown in the illustration:
a. Slide to release the memory cover from the computer [1].
b. Remove the memory cover from the computer [2].
4.
Pry the retention clips away from the memory module until it pops up. Lift and remove the memory
module from its connector.
Installing the Memory
1.
Align the notch on the memory-card with the tab in the system-board connector.
2.
Press down on the memory module until the release tabs spring back to secure them in place.
3.
Place the memory cover back into its place.
4.
Install:
a. back cover
b. stand
c. stand cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a. stand cover
b. stand
c. back cover
17
