manualshive.com logo in svg

Dell OptiPlex 3020-Mini Tower, Owner'S Manual

Share
Download
Dell OptiPlex 3020-Mini Tower Owner'S Manual Download Page 38

Option

Description

•

Enable CPU XD Support

 - This option is enabled by default.

Admin Setup Lockout

Allows you to enable or disable the option to enter setup when an admin 
password is set.

•

Enable Admin Setup Lockout

 - This option is not set by default.

HDD Protection 
Support

Allows you to enable or disable the HDD Protection feature

• HDD Protection Support

Disable

 - This option is disabled by default.

Table 6. Secure Boot

Option

Description

Secure Boot Enable

Allows you to enable or disable the 
Secure Boot Feature. The options are:

•

Disabled

 (Default)

• Enabled

Expert Key Management

Allows you to manipulate the security 
key databases only if the system is in 
Custom Mode. The 

Enable Custom 

Mode

 option is disabled by default. The 

options are:

• PK
• KEK
• db
• dbx

If you enable the 

Custom Mode

, the 

relevant options for

 PK, KEK, db, and 

dbx

 appear. The options are:

•

Save to File

- Saves the key to a user-

selected file

•

Replace from File

- Replaces the 

current key with a key from a user-

selected file

•

Append from File

- Adds a key to the 

current database from a user-

selected file

•

Delete

- Deletes the selected key

•

Reset All Keys

- Resets to default 

setting

•

Delete All Key

s- Deletes all the keys

NOTE: If you disable the Custom 

Mode, all the changes made will be 

erased and the keys will restore to 

default settings.

38

Summary of Contents for OptiPlex 3020-Mini Tower




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands