Dell OpenManage HIP 3.2, User Manual

Page: 28 / 75

2-4 HP OpenView NNM SE 1.2 With Dell OpenManage HIP 3.2 User’s Guide
If you are installing LDSM 2.52 with Dell HIP 2.2 on a Dell PowerEdge 6100 server
with the HP OpenView NNM SE agents previously installed, you must first uninstall
the HP OpenView NNM SE agents. Refer to “Installing LDSM Agents With a Previ-
ously Installed Dell HIP 3.2 Managed Node” found later in this chapter.
To install a Dell managed node for Windows NT, use the following procedure:
1. Insert the HP OpenView Network Node Manager Special Edition CD into your
CD-ROM drive.
There is a short delay due to setup initialization.
NOTE: On systems using the Windows NT 3.51 operating system, run the
setup.exe file in the root directory of the CD.
The Dell OpenManage Software Installation window appears with three option
buttons:
‡
Install Managed Node — Installs a Dell managed node onto the Dell server.
This node is the Dell HIP, which consists of services, files, and drivers to sup-
port management of Dell’s servers and selected hardware.
‡
Install Dell NNM SE — Installs NNM SE along with Dell system compo-
nents on the management station, which provide consoles and management
capabilities for Dell systems.
‡
Exit — Exits setup.
2. Click Install Managed Node .
The Welcome screen appears.
3. Click Next .
The Dell End User License Agreement appears.
4. Click Yes if you accept the terms of the agreement and want to continue; click No
to cancel the installation.
If you clicked Yes , the User Information window appears.
5. Enter your name and company name, and click Next .
The Setup Options window appears.
6. Click Dell Managed NT Node .
The Choose Destination Location window appears.
7. Select a destination directory. Click Browse to find the directory you want, or
click Next to accept the default ( c:\dmi ) for Windows NT.
If you choose the default and it does not exist, a dialog box appears asking if you
want the directory to be created. Click
Yes .
The Confirm New Directory window appears.