Dell Networking S6000 System, Reference Manual

Page: 1146 / 1510

Pre-Defined WRED
Profile Name
Minimum
Threshold
Maximum
Threshold
Maximum Drop
Rate
wred_drop 0 0 100
wred_teng_y 594 5941 100
wred_teng_g 594 5941 50
wred_fortyg_y 594 5941 50
wred_fortyg_g 594 5941 25
Related
Commands wred-profile — creates a WRED profile.
trust
Specify dynamic classification (DSCP) or dot1p to trust.
S6000
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diffserv Enter the keyword
diffserv
to specify trust of DSCP
markings.
dot1p Enter the keyword
dot1p
to specify trust dot1p
configuration.
fallback Enter the keyword
fallback
to classify packets according
to their DSCP or dot1p value as a secondary option in case
no match occurs against the configured class maps.
Defaults none
Command
Modes CONFIGURATION (conf-policy-map-in)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
When you configure
trust
, matched bytes/packets counters are not incremented
in the
show qos statistics
command.
1146
Quality of Service (QoS)