Dell N1100-ON, Reference Manual

Page: 1972 / 2332

Switch Management Commands
1972
Line Commands
This section explains the following commands:
Authentication commands related to line configuration mode are in DHCP
Client Commands .
accounting
Use the accounting command in Line Configuration mode to apply an
accounting method to a line config.
Use the
no form of the command to return the accounting for the line mode
to the default.
Syntax
accounting {exec|commands} [default| list-name ]
no accounting
• exec —Provides accounting for a user Exec terminal session.
• commands —Provides accounting for all user-executed commands.
• default —The default list of methods for accounting services.
• list-name—Character string of not more than 15 characters used to
name the list of accounting methods. The list name can consist of any
printable character other than a question mark. Use quotes around the
list name if embedded blanks are contained in the list name.
accounting line
authorization login authentication
enable authentication login-banner
exec-banner motd-banner
exec-timeout password (Line Configuration)
history show line
history size speed
terminal length