Dell MR2217 Page 40 User Manual Download

Page: 40 / 66

| Operating

the

Monitor

Front Panel Button

Use the buttons on the front of the monitor to adjust the image settings.

Front Panel Button

Description

Use the

button to adjust (increase ranges) items in the OSD menu.

Down

Use the

Down

button to adjust (decrease ranges) items in the OSD

menu.

Use the

button to confirm your selection.

Back

Use the

Back

button to go back to the previous menu.

Shortcut key/

Brightness/Contrast

Use this button to directly access the

Brightness/Contrast

menu.

Use the

button to launch the On-Screen Display

(OSD) and select the OSD Menu. See Accessing the Menu
System.

Exit

Use this button to go back to the main menu or exit the OSD
main menu.

Power

(with power light

indicator)

Use the

Power

button to turn the monitor

and

Off

The green light indicates the monitor is

and fully

functional. An amber

light indicates the power save mode.

Summary of Contents for MR2217



































































Search results

Summary of Contents for MR2217

Reviews:

Related manuals for MR2217

Brands by name

Popular brands

Dell MR2217, User Manual

Search results

Summary of Contents for MR2217

Reviews:

Related manuals for MR2217

Brands by name

Popular brands