Dell MR2217 User Manual Download

Page: 5 / 66

Safety

Information |

Safety Information

WARNING: Safety Instructions

WARNING: Use of controls, adjustments, or procedures other than those

specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.

Please read safety and instructions for use before operating the device.

Please retain this user's guide for future reference.

For information on safety instructions, see the

Safety, Environmental, and Regulatory

Information

Symbols on the Device

Symbol

Location

Explanation

Rear

Indicates manufacture’s serial number.

Rear

Indicates the date of manufacture.

Rear

This device complies with local regulations for disposal
of electronic products.

Rear

Follow operating instructions for use.

Rear

This device complies with Part 15 Class B of the FCC
rules.

Rear

Indicates Direct Current (DC).

Rear

Indicates the device is approved according to the
cTUVus regulations.

Summary of Contents for MR2217



































































Search results

Summary of Contents for MR2217

Reviews:

Related manuals for MR2217

Brands by name

Popular brands

Dell MR2217, User Manual

Search results

Summary of Contents for MR2217

Reviews:

Related manuals for MR2217

Brands by name

Popular brands