PowerVault (Dell MD1400 - 16TB) Setup Guide
Capability with NetWitness Platform Series 5 or 6 Hosts
NetWitness Platform Series 5 or 6 hosts are shipped with the software to support a PowerVault
installation. The initial setup of a PowerVault in your network involves these steps:
1. Review site requirements and safety information.
2. Install PowerVault.
Package Contents
Refer to the documentation that is included with the PowerVault. The
Dell Storage MD1400
Enclosures Hardware Owner's Manual
https://topics-cdn.dell.com/pdf/md1400om_en-us.pdf
contains detailed instruction on all the optional setups you can implement with PowerVault to
address the needs of your environment.
Note:
The PowerVault comes with two SAS cables. You only need one cable to connect the
PowerVault to a Series 5 or 6 host. Use a cable with the mini-to-mini-SAS connectors to
connect the PowerVault to a Series 5 or 6 host.
Customer Supplied Materials
You do not need to supply any materials.
Hardware Description
8
