PowerVault (Dell MD1400 - 16TB) Setup Guide
About this Document
This document provides instructions for installing a PowerVault external storage device on
NetWitness Series 5 and Series 6 (Network) Decoder, Log Decoder, Concentrator, Archiver, and
Hybrid hosts.
The hardware setup instructions in this document are for hardware only; they do not apply to a
specific release of NetWitness Platform software. This document is for new hardware only. It is
not intended for PowerVaults with preexisting data.
For NetWitness Platform 11.5 and later, use the hardware connection information in this guide,
but refer to
Storage Guide for NetWitness Platform Version 11.5 and later
for instructions on
how to allocate storage for your hardware.
Caution:
If you are adding a previously used PowerVault and would like to preserve the data,
DO NOT follow the instructions in this guide. Contact Netwitness Customer Support. Running
the script on a previously used PowerVault could erase any existing data.
Note:
When viewing a printed guide, be aware that a newer version of the guide may be
available online at
NetWitness Link
in NetWitness® Platform under Hardware Setup Guides:
5
About this Document
