Back to Removing and Replacing Parts
WWAN Card
Dell™ Latitude™ E6410/E6410 ATG Service Manual
Removing the WWAN Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ATG Port Cover
(applicable on E6410 ATG computer only).
3.
Remove the
battery
.
4.
Remove the
access panel
.
5.
Disconnect any antenna cables that may be connected to the WWAN card.
6.
Remove the screw that secures the WWAN card in the computer.
7.
Remove the WWAN card from the computer.
Replacing the WWAN Card
To replace the WWAN card, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
Summary of Contents for Latitude E6410
Page 6: ...Back to Contents Page ...